Detex FV40 48 in Fire Rated Rim Exit Device

The Detex FV40 is the fire rated version of the V40 rim exit device from Detex's Value Series, for fire-rated openings: single doors, and pairs of doors with a keyed removable mullion. Detex lists it as fire exit hardware for 3 hour openings. It has a stainless steel 3/4 in deadlocking Pullman type latchbolt and a heavy-duty ribbed aluminum rail, and Detex rates it to withstand over 1,400 lbs of static pull force. This is the 48 in device with the 99 surface strike, in aluminum (628) or black (711). Detex describes its products as assembled in America.

Specifications

Model	FV40 LD 628 99 48 (aluminum) or FV40 LD 711 99 48 (black)
Device type	Rim fire exit hardware
Door width	Fits a 48 in (4 ft) wide door
Fire listing	UL listed fire exit hardware for 3 hours, on single doors up to 4 ft x 10 ft and on pairs up to 4 ft x 8 ft with the F90KR keyed removable mullion
Doors	Wood, hollow metal, fiberglass or aluminum, 1-3/4 in to 2-1/4 in thick. Stiles of 3-1/2 in or more on single doors and 4 in or more on pairs, with the 99 strike
Latchbolt	Stainless steel 3/4 in deadlocking Pullman type
Strike	99 surface strike
Rail	Heavy-duty ribbed aluminum
Finish	Aluminum (628): black end pieces and push pad on an aluminum rail. Black (711): black all over. Selected above
Dogging	None (LD). Fire rated devices are not dogged
Handing	Non-handed
Listings	UL listed panic hardware (UL 305) and fire exit hardware; UL 10B fire test and UL 10C positive pressure fire test; ANSI/BHMA A156.3 Grade 1. Detex states it meets NFPA 80, NFPA 101 and ADA requirements
Warranty	Detex limited warranty: 10 years mechanical, 3 years electrical

Why there is no dogging option

Detex supplies its fire rated devices without dogging (LD). A fire door has to latch every time it closes, so fire exit hardware cannot be held open with a dogging key the way panic hardware can. If the opening does not need a fire rating, the panic hardware version of this device offers hex or cylinder dogging. Detex's photo shows that panic hardware version, with its dogging access point on the rail; this fire rated device has none.

On a fire-rated opening

Fire exit hardware is one part of a rated opening. The door, frame, hinges, closer and any outside trim have to be rated for it too, so check the labels on the door and frame before you order. Outside trim is sold separately.

Related standards

How fire doors and their hardware are installed and inspected: NFPA 80. The positive pressure fire test behind the listing: UL 10C. The panic hardware standard: UL 305, and the Grade 1 testing basis: ANSI/BHMA A156.3. Exit and egress rules for your occupancy: NFPA 101 and IBC Chapter 10.

Documents

Detex V40 product page