Norton 1601 Adjustable Surface Door Closer
Norton Rixson$150.00
Typically ships in 1-3 business days.
Volume pricing on 10+ units.
US Made Products
Flat Rate Shipping
Business Support
American businesses trust US Made Supply because we do the research.
Call 714-248-6555 or email us.
The Norton Rixson 1601 is an ANSI/BHMA Grade 1 surface door closer for interior and exterior doors in medium traffic commercial openings. Its spring power adjusts through sizes 1 to 6, and it comes Tri-Style packed, so the same closer mounts regular arm, top jamb or parallel arm. Choose the non hold open regular arm (1601) or the friction hold open arm (1601H). See all our surface door closers.
Specifications
| Model | 1601 (regular arm) or 1601H (hold open arm). Arm and finish selected above |
| Spring power | Adjustable through sizes 1 to 6. Norton says it can be adjusted to meet the ADA and ANSI A117.1 opening force for interior doors, and cautions that a closer set to that low force may not close and latch the door dependably on every opening |
| Mounting | Tri-Style packaging for a regular arm, top jamb or parallel arm installation. Non-handed |
| Construction | Rack and pinion, cast aluminum body, 1-3/8 in piston. Separate latch speed, sweep speed and backcheck valves; backcheck begins at about 75 degrees of opening |
| Door | Up to a 250 lb door, per Norton. All standard arm installations allow a 180 degree swing where the door, frame and hardware permit |
| Closer body | 9-3/4 in long, 2-5/8 in high, 2-7/8 in projection |
| Standards | ANSI/BHMA A156.4 Grade 1. Norton lists the 1600 Series as UL/cUL listed and UL 10C positive pressure rated up to 3 hours. The 1601H hold open arm is not permitted on fire door assemblies |
| Finishes | 689 aluminum or 690 dark bronze, painted, or 696 (US4). Other Norton finishes by quote |
Hold open arm and fire doors
The 1601H holds the door open by friction, at a point set during installation: 90 to 180 degrees on a regular arm installation, per Norton. Norton's hold open installation instructions give the range for top jamb and parallel arm installations. Norton states that hold open arm door closers are not permitted on fire door assemblies, so do not use the 1601H on a fire door. For a fire door opening, use a listed non hold open configuration, and check the door's label and your authority having jurisdiction.
Documents
Norton Rixson 1600 Series product page
Norton Rixson surface closers catalog
1600 Series Tri-Style non hold open installation instructions
1600 Series hold open arm installation instructions
The Norton Rixson 1601 is an ANSI/BHMA Grade 1 surface door closer for interior and exterior doors in medium traffic commercial openings. Its spring power adjusts through sizes 1 to 6, and it comes Tri-Style packed, so the same closer mounts regular arm, top jamb or parallel arm. Choose the non hold open regular arm (1601) or the friction hold open arm (1601H). See all our surface door closers.
Specifications
| Model | 1601 (regular arm) or 1601H (hold open arm). Arm and finish selected above |
| Spring power | Adjustable through sizes 1 to 6. Norton says it can be adjusted to meet the ADA and ANSI A117.1 opening force for interior doors, and cautions that a closer set to that low force may not close and latch the door dependably on every opening |
| Mounting | Tri-Style packaging for a regular arm, top jamb or parallel arm installation. Non-handed |
| Construction | Rack and pinion, cast aluminum body, 1-3/8 in piston. Separate latch speed, sweep speed and backcheck valves; backcheck begins at about 75 degrees of opening |
| Door | Up to a 250 lb door, per Norton. All standard arm installations allow a 180 degree swing where the door, frame and hardware permit |
| Closer body | 9-3/4 in long, 2-5/8 in high, 2-7/8 in projection |
| Standards | ANSI/BHMA A156.4 Grade 1. Norton lists the 1600 Series as UL/cUL listed and UL 10C positive pressure rated up to 3 hours. The 1601H hold open arm is not permitted on fire door assemblies |
| Finishes | 689 aluminum or 690 dark bronze, painted, or 696 (US4). Other Norton finishes by quote |
Hold open arm and fire doors
The 1601H holds the door open by friction, at a point set during installation: 90 to 180 degrees on a regular arm installation, per Norton. Norton's hold open installation instructions give the range for top jamb and parallel arm installations. Norton states that hold open arm door closers are not permitted on fire door assemblies, so do not use the 1601H on a fire door. For a fire door opening, use a listed non hold open configuration, and check the door's label and your authority having jurisdiction.
Documents
Norton Rixson 1600 Series product page
Norton Rixson surface closers catalog
1600 Series Tri-Style non hold open installation instructions
1600 Series hold open arm installation instructions
More from Norton Rixson
View all →
Manufacturer: Norton Rixson
Norton 1618A689 Standard Soffit Plate for Non Hold Open Closers Aluminum Finish
$40.00
$43.97

Manufacturer: Norton Rixson
Norton 1628H689 Standard Soffit Plate for Hold Open Closers Aluminum Finish
$42.00

Manufacturer: Norton Rixson
Norton 1688689 Overhead Holder or Narrow Top Jamb Drop Plate Aluminum Finish
$40.00
$66.50

Manufacturer: Norton Rixson
Norton 7500689 Adjustable Heavy Duty Surface Mount Door Closer with Sex Nuts Aluminum Finish
$500.00
$824.75

Manufacturer: Norton Rixson
Norton 7500690 Adjustable Heavy Duty Surface Mount Door Closer with Sex Nuts Dark Bronze Finish
$425.00
$824.75

Manufacturer: Norton Rixson
Norton 7786689 Narrow Frame Drop Plate for 7500 Series Aluminum Finish
$135.00

Manufacturer: Norton Rixson
Norton 7788689 Narrow Top Rail Drop Plate for 7500 Series Aluminum Finish
$135.00

Manufacturer: Norton Rixson
Norton 8146689 Narrow Top Rail / Concealed Door Holder Drop Plate for 8000 Series Aluminum Finish
$75.00
$83.66





