Pemko FS_HD1 full surface continuous geared hinge, clear anodized aluminum

Pemko FS_HD1 full surface continuous geared hinge, dark bronze anodized aluminum

Pemko FS HD1 Full Surface Continuous Geared Hinge Heavy Duty Grade 1

Pemko

$305.00

Built to order. Typically ships in 4-6 weeks.

Volume pricing on 10+ units.

US Made Products

Flat Rate Shipping

Business Support

American businesses trust US Made Supply because we do the research.

Call 714-248-6555 or email us.

The Pemko FS_HD1 is a full surface continuous geared aluminum hinge, applied to the exposed surfaces of the door and frame, so neither needs a mortise. Pemko says special hinge reinforcements are not required.

Specifications

Model	Pemko FS_HD1 full surface continuous geared hinge, heavy weight
Grade	ANSI/BHMA A156.26 Grade 1 for 300 lb doors (Pemko)
Materials and finishes standard	Pemko also lists ANSI/BHMA A156.18
Fire	Pemko lists UL 10C, and says the FS is for swinging fire doors of hollow metal, tin-clad, sheet metal or steel covered composite type rated up to 3 hours, and wood covered composite type rated up to and including 1-1/2 hours. UL 10C is a positive-pressure fire test standard, not an hourly rating for the hinge or the opening. Pemko requires fire pins for 3-hour (A-label) assemblies; these variants do not include fire pins. Confirm the complete labeled door, frame, hinge and hardware configuration for the rating you need. Pemko notes that excessive clearance on fire rated assemblies may violate NFPA 80
Door	1-3/4 in thick, up to 4 ft wide (Pemko)
Swing and clearance	Up to 180°; minimum hinge clearance 1/16 in (Pemko)
Handing	Non-handed
Fasteners	Teks self-drilling fasteners (Pemko)
Material and finish	Aluminum, clear or dark bronze anodized
Lengths	clear anodized in 83 in; dark bronze anodized in 83 in
Weight	1.29 lb per foot (Pemko)
Reinforcement (Pemko)	Special hinge reinforcements are not required; hollow metal door and frame manufacturers' standard reinforcement is acceptable. Pemko does not advise removing the hinge reinforcements in the door and frame

Manufacturer page: Pemko FS Series

Specifications

Model	Pemko FS_HD1 full surface continuous geared hinge, heavy weight
Grade	ANSI/BHMA A156.26 Grade 1 for 300 lb doors (Pemko)
Materials and finishes standard	Pemko also lists ANSI/BHMA A156.18
Fire	Pemko lists UL 10C, and says the FS is for swinging fire doors of hollow metal, tin-clad, sheet metal or steel covered composite type rated up to 3 hours, and wood covered composite type rated up to and including 1-1/2 hours. UL 10C is a positive-pressure fire test standard, not an hourly rating for the hinge or the opening. Pemko requires fire pins for 3-hour (A-label) assemblies; these variants do not include fire pins. Confirm the complete labeled door, frame, hinge and hardware configuration for the rating you need. Pemko notes that excessive clearance on fire rated assemblies may violate NFPA 80
Door	1-3/4 in thick, up to 4 ft wide (Pemko)
Swing and clearance	Up to 180°; minimum hinge clearance 1/16 in (Pemko)
Handing	Non-handed
Fasteners	Teks self-drilling fasteners (Pemko)
Material and finish	Aluminum, clear or dark bronze anodized
Lengths	clear anodized in 83 in; dark bronze anodized in 83 in
Weight	1.29 lb per foot (Pemko)
Reinforcement (Pemko)	Special hinge reinforcements are not required; hollow metal door and frame manufacturers' standard reinforcement is acceptable. Pemko does not advise removing the hinge reinforcements in the door and frame

Manufacturer page: Pemko FS Series