Pemko HS_HD1 half surface continuous geared hinge, clear anodized aluminum

Pemko HS HD1 Half Surface Continuous Geared Hinge Heavy Duty Grade 1

Pemko

$309.00

Built to order. Typically ships in 4-6 weeks.

Volume pricing on 10+ units.

US Made Products

Flat Rate Shipping

Business Support

American businesses trust US Made Supply because we do the research.

Call 714-248-6555 or email us.

The Pemko HS_HD1 is a half surface continuous geared aluminum hinge. Pemko makes it for hollow metal frames where the inset conforms to SDI specifications for aligning doors and frames, and says it allows adjustment to properly align the edge of the door to the frame.

Specifications

Model	Pemko HS_HD1 half surface continuous geared hinge, heavy weight, 3 in bearing spacing
Grade	ANSI/BHMA A156.26 Grade 1 for 300 lb doors (Pemko)
Materials and finishes standard	Pemko also lists ANSI/BHMA A156.18
Fire	Pemko lists HS_HD1 as UL 10C fire rated. UL 10C is a positive-pressure fire test standard, not an hourly rating for the hinge or the opening. Pemko requires fire pins for 3-hour (A-label) assemblies; these variants do not include fire pins. Confirm the complete labeled door, frame, hinge and hardware configuration for the rating you need. Pemko notes that excessive clearance on fire rated assemblies may violate NFPA 80
Door	1-3/4 to 2-1/4 in thick, up to 4 ft wide (Pemko)
Swing and clearance	Up to 180°; minimum hinge clearance 1/8 in. Pemko says some door and frame conditions may need an extra 1/32 to 1/16 in
Handing	Non-handed
Fasteners	Pemko's specification table lists Teks self-drilling fasteners, while its feature list details frame and door fasteners by type, so confirm the fasteners supplied; wood screws are available from Pemko on request
Material and finish	Aluminum, clear anodized
Lengths	clear anodized in 83 and 95 in
Weight	1.28 lb per foot (Pemko)
Reinforcement (Pemko)	Special hinge reinforcements are not required; hollow metal door and frame manufacturers' standard is acceptable. Pemko does not advise removing the hinge reinforcements in the door and frame

Manufacturer page: Pemko HS Series

Specifications

Model	Pemko HS_HD1 half surface continuous geared hinge, heavy weight, 3 in bearing spacing
Grade	ANSI/BHMA A156.26 Grade 1 for 300 lb doors (Pemko)
Materials and finishes standard	Pemko also lists ANSI/BHMA A156.18
Fire	Pemko lists HS_HD1 as UL 10C fire rated. UL 10C is a positive-pressure fire test standard, not an hourly rating for the hinge or the opening. Pemko requires fire pins for 3-hour (A-label) assemblies; these variants do not include fire pins. Confirm the complete labeled door, frame, hinge and hardware configuration for the rating you need. Pemko notes that excessive clearance on fire rated assemblies may violate NFPA 80
Door	1-3/4 to 2-1/4 in thick, up to 4 ft wide (Pemko)
Swing and clearance	Up to 180°; minimum hinge clearance 1/8 in. Pemko says some door and frame conditions may need an extra 1/32 to 1/16 in
Handing	Non-handed
Fasteners	Pemko's specification table lists Teks self-drilling fasteners, while its feature list details frame and door fasteners by type, so confirm the fasteners supplied; wood screws are available from Pemko on request
Material and finish	Aluminum, clear anodized
Lengths	clear anodized in 83 and 95 in
Weight	1.28 lb per foot (Pemko)
Reinforcement (Pemko)	Special hinge reinforcements are not required; hollow metal door and frame manufacturers' standard is acceptable. Pemko does not advise removing the hinge reinforcements in the door and frame

Manufacturer page: Pemko HS Series