Ampco H-101FG Non-Sparking Mixing Hoe 8 in Straight Blade
Ampco Safety Tools$389.00
Volume pricing on 10+ units.
US Made Products
Flat Rate Shipping
Business Support
American businesses trust US Made Supply because we do the research.
Call 714-248-6555 or email us.
The Ampco Safety Tools H-101FG is a garden and mixing hoe with an 8 in straight blade on a fiberglass handle, 55 in long overall. Ampco lists it as made in the USA.
Ampco describes its tools as non-sparking, non-magnetic and corrosion resistant. Tools like this are used where a steel tool could strike a spark near flammable vapors, liquids or combustible dust. Read more about where non-sparking tools fit.
Specifications
| Model | H-101FG |
| Type | Garden and mixing hoe, straight blade |
| Blade width | 8 in |
| Overall length | 55 in |
| Handle | Fiberglass |
| Weight | 3.9 lb |
Before you use it
Ampco notes that non-sparking tools are softer than steel, so use each one only for the job it is made for. It also says to keep copper-based tools out of direct contact with acetylene, ethylene oxide and some explosives, such as amatol, DBX and lead azide. Ampco's alloys conduct electricity, so ground the tool where static charge is a concern.
As our guide on the limits of non-sparking tools explains, a non-sparking tool makes an igniting spark less likely. It does not replace ventilation, atmosphere monitoring or grounding.
Related: all non-sparking tools
Manufacturer page: Ampco H-101FG
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Ampco Safety Tools H-101FG is a garden and mixing hoe with an 8 in straight blade on a fiberglass handle, 55 in long overall. Ampco lists it as made in the USA.
Ampco describes its tools as non-sparking, non-magnetic and corrosion resistant. Tools like this are used where a steel tool could strike a spark near flammable vapors, liquids or combustible dust. Read more about where non-sparking tools fit.
Specifications
| Model | H-101FG |
| Type | Garden and mixing hoe, straight blade |
| Blade width | 8 in |
| Overall length | 55 in |
| Handle | Fiberglass |
| Weight | 3.9 lb |
Before you use it
Ampco notes that non-sparking tools are softer than steel, so use each one only for the job it is made for. It also says to keep copper-based tools out of direct contact with acetylene, ethylene oxide and some explosives, such as amatol, DBX and lead azide. Ampco's alloys conduct electricity, so ground the tool where static charge is a concern.
As our guide on the limits of non-sparking tools explains, a non-sparking tool makes an igniting spark less likely. It does not replace ventilation, atmosphere monitoring or grounding.
Related: all non-sparking tools
Manufacturer page: Ampco H-101FG
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
More from Ampco Safety Tools
View all →
Manufacturer: Ampco Safety Tools
Ampco B-399 Non-Sparking Scratch Brush Shoe Handle
$53.00
Manufacturer: Ampco Safety Tools
Ampco B-400 Non-Sparking Scratch Brush Curved Handle
$50.00
Manufacturer: Ampco Safety Tools
Ampco BW-1 Non-Sparking Banana Wedge 12-1/4 in
$223.00
Manufacturer: Ampco Safety Tools
Ampco H-00FG Non-Sparking Ball Peen Hammer 4 oz
$65.00
Manufacturer: Ampco Safety Tools
Ampco H-20FG Non-Sparking Claw Hammer 16 oz
$109.00
Manufacturer: Ampco Safety Tools
Ampco H-69FG Non-Sparking Sledge Hammer 3 lb 14 in Long
$185.00
Manufacturer: Ampco Safety Tools
Ampco H-70FG Non-Sparking Sledge Hammer 6 lb 33 in Long
$268.00
Manufacturer: Ampco Safety Tools
Ampco H-71FG Non-Sparking Sledge Hammer 8 lb 33 in Long
$367.00