Welding Blanket Silicone Coated Silica with Grommets

Welding Blanket Silicone Coated Silica with Grommets, woven, coated and sewn by Auburn Manufacturing in Mechanic Falls, Maine.

Auburn rates this fabric as a welding blanket under FM 4950, for horizontal exposure to sparks, heat and slag. A blanket may also be used where a curtain is specified. NFPA 51B · hot work permit set out when combustibles have to be covered during hot work and who has to watch the job.

Specifications

• 96 percent minimum silica base fabric rated to 1800F continuous
• Red silicone coating on one side resists water and oil, rated to 500F continuous
• 29 oz per sq yd with coating
• Herringbone weave for a relatively lightweight but strong fabric
• Heat cleaned to a bronze color to set the weave for better handling and stability
• Made in Auburn's Maine facilities

Sizes

• 3 ft x 5 ft (15 sq ft). 3 ft x 5 ft suits small jobs such as garages, body shops and studios.
• 5 ft x 6 ft (30 sq ft). 5 ft x 6 ft is sized for an average industrial jobsite.
• 5 ft x 8 ft (40 sq ft). 5 ft x 8 ft covers larger industrial sites, protecting equipment and structure from heat, sparks and slag.

What you receive

Supplied as the sewn fabric article only, with grommets set 18 in on center for hanging. No frame, poles or stand are included.

Duty ratings, material specifications and temperature limits above are as published by Auburn Manufacturing. Style code SAS2400-1.