Welding Pad Carbon Fiberglass Composite with Grommets

Welding Pad Carbon Fiberglass Composite with Grommets, woven, coated and sewn by Auburn Manufacturing in Mechanic Falls, Maine.

Auburn rates this fabric as a welding pad under FM 4950, the severe-duty level for horizontal exposure including direct molten metal contact. A pad may also be used where a blanket or curtain is specified, so it covers all three duty levels. NFPA 51B · hot work permit set out when combustibles have to be covered during hot work and who has to watch the job.

Specifications

• Carbon fiberglass composite: the fiberglass stabilizes the carbon when heated and the carbon dissipates direct heat at the face
• The softest welding fabric in the Auburn line
• 20 oz per sq yd, 0.15 in thick
• Rated to 500F continuous
• Not moisture resistant

Sizes

• 3 ft x 5 ft (15 sq ft). 3 ft x 5 ft suits small jobs such as garages, body shops and studios.
• 5 ft x 6 ft (30 sq ft). 5 ft x 6 ft is sized for an average industrial jobsite.
• 5 ft x 8 ft (40 sq ft). 5 ft x 8 ft covers larger industrial sites, protecting equipment and structure from heat, sparks and slag.

What you receive

Supplied as the sewn fabric article only, with grommets set 18 in on center for hanging. No frame, poles or stand are included.

Duty ratings, material specifications and temperature limits above are as published by Auburn Manufacturing. Style code PGL2000.