JL Industries Ambassador Steel Surface Mount Fire Extinguisher Cabinet 10 lb 1013V10

The JL Industries Ambassador 1013V10 is a surface-mount steel fire extinguisher cabinet for a 10 lb extinguisher, made in the USA. The whole cabinet mounts on the wall face, so there is no wall opening to cut: it suits masonry, tilt-up, thin partitions, and any wall you cannot open up. The vertical-duo door pairs a steel panel with a narrow clear acrylic window, so the extinguisher is visible at a glance without a full glass front, and swings on a continuous hinge that opens 180 degrees with a zinc-plated pull handle and roller catch. It is the same cabinet as the full-view 1013F10 with the vertical-duo door.

Specifications

Model	Ambassador 1013V10
Mounting	Surface mount, square edge, no wall opening
Fits extinguisher	2.5 to 10 lb (see compatibility below)
Cabinet (W×H×D)	13-11/16 in × 27-3/16 in × 6-1/2 in
Trim, outside (W×H)	13-7/8 in × 27-3/8 in
Material / finish	Cold-rolled steel, white powder coat
Door	Vertical-duo clear acrylic glazing, pull handle, 180° continuous hinge
Fire rating	Non-rated
Wall projection (ADA limit 4 in)	Projects more than 4 in, over the ADA protrusion limit
Weight	18 lb
Country of Origin	USA

Extinguisher compatibility

JL rates this tub for Cosmic and Galaxy extinguishers from 2.5 to 10 lb, Mercury from 2.5 to 5 lb, and the 5 lb Sentinel. Check your extinguisher's cylinder diameter and handle height against the 6 in tub depth before ordering. See our Fire Extinguisher Cabinet Selection Guide for how depth drives fit.

Placement and mounting height follow the NFPA 10 requirements.

Where this model fits

Surface mount is the answer when the wall cannot be opened: masonry, tilt-up, a rated wall you do not want to penetrate, or a retrofit where cutting is off the table. It stands 6-1/2 in off the wall, so it belongs in a recess, an alcove, or a location outside a corridor or means of egress, where the 4 in protrusion limit applies. The product images are representative of this configuration; the cabinet ships built as specified in the table above. JL makes this cabinet with a full-view door (1013F10, listed), a solid door, and Saf-T-Lok versions, in aluminum and stainless, and fire-rated; for any of those, request a quote from this page.

Documents and downloads

For specification and installation: the manufacturer's Ambassador 1013V10 submittal (PDF). Need a project-specific submittal filled out? Send us the project details with a quote request.