JL Industries Guardsman Ligature Resistant Steel Recessed Fire Extinguisher Cabinet 10 lb CL1015M2

The JL Industries Guardsman CL1015M2 is a ligature resistant fire extinguisher cabinet for a 10 lb extinguisher, fully recessed, made in the USA. JL designs the Guardsman for behavioral health and other institutional rooms that need more safety and security than a standard cabinet gives: the trim edges are angled, and the solid 16 gauge steel door, with no pull and no window, hangs on a concealed stud rod hinge. The door ships with a mortise cam lock installed and two keys.

Specifications

Model	Guardsman CL1015M2
Mounting	Fully recessed, 3/16 in flat angled trim
Fits extinguisher	2.5 to 10 lb
Tub interior (W×H×D)	10-1/2 in × 24 in × 6 in
Trim, outside (W×H)	14-7/16 in × 27-5/8 in
Rough wall opening (W×H×D)	11-1/2 in × 25 in × 6 in
Door	Solid 16 gauge cold-rolled steel, no pull, no glazing
Lock	Mortise cam lock (Kaba Ilco), installed, two keys
Hinge	Concealed stud rod, opens to 95°
Material / finish	16 gauge cold-rolled steel trim and door, 22 gauge galvanized steel tub, white powder coat
Fire rating	Non-rated
Wall projection (ADA limit 4 in)	3/16 in
Weight	17 lb
Country of Origin	USA

What ligature resistant means here

The design takes away the usual attachment points of a standard cabinet: the trim edges are angled, the door has no pull or window and the hinge is concealed. JL says the cabinet is internally tested to resist ligature attachment and names no outside test standard, so review it against your facility's own ligature risk assessment.

Extinguisher compatibility

JL rates this tub for Cosmic and Galaxy extinguishers from 2.5 to 10 lb, Mercury from 2.5 to 5 lb and the 5 lb Sentinel. Check your extinguisher's cylinder diameter and handle height against the 6 in tub depth before ordering. See our Fire Extinguisher Cabinet Selection Guide for how depth drives fit.

Placement and mounting height follow the NFPA 10 requirements.

Where this model fits

Fully recessed behind a 3/16 in trim, this is the Guardsman for a patient room or corridor wall where the cabinet should sit nearly flush. It needs a wall that can give up 6 in of depth, and JL says to confirm the rough opening depth before ordering. The door is solid, so the monthly inspection needs the key too: keep one where staff and the extinguisher inspector can reach it, and mark the cabinet's location, since the door hides the extinguisher (JL can letter the door at the factory on a quote). This model is built to order at the factory. The product image is representative of this configuration, and the cabinet ships built as specified in the table above. JL also builds the Guardsman semi-recessed and surface mounted, fire-rated, in stainless steel, for a 20 lb extinguisher and with a cylinder lock or a temporary green-core lock. For any of those, request a quote from this page.

Documents and downloads

For specification and installation: the manufacturer's Guardsman CL1015M2 submittal (PDF), Guardsman series submittal (PDF). Need a project-specific submittal filled out? Send us the project details with a quote request.