JL Industries Panorama Stainless Semi-Recessed Frameless Fire Extinguisher Cabinet 10 lb 1036C70

The JL Industries Panorama 1036C70 is a semi-recessed fire extinguisher cabinet with a frameless door and 304 stainless steel door and trim, made in the USA. The frameless build is what separates the Panorama from every other cabinet line: the glazing runs to the edge of the opening with no surrounding door frame. This is the stainless build with a 1-1/2 in square trim, glazed in clear 3/16 in unlettered polycarbonate. The product images are representative of this configuration; the cabinet ships built as specified in the table below.

Specifications

Model	Panorama 1036C70
Mounting	Semi-recessed, 1-1/2 in square trim
Door	Frameless, clear 3/16 in unlettered smooth polycarbonate
Trim and door finish	304 stainless steel #4
Tub finish	Steel, white powder coat
Hinge	Continuous stainless hinge, opens 180 degrees
Hardware	Zinc plated pull handle with roller catch
Tub interior (W×H×D)	10-1/2 in × 24 in × 6 in
Trim outside (W×H)	13-7/8 in × 27-3/8 in
Wall rough opening (W×H×D)	11-1/2 in × 25 in × 4-5/8 in
Fire rating	Non-rated
Wall projection (ADA limit 4 in)	Under 4 in
Weight	17 lb
Country of Origin	USA

Extinguisher compatibility

JL rates this tub for Cosmic and Galaxy extinguishers from 2.5 to 10 lb, Mercury from 2.5 to 5 lb, and the 5 lb Sentinel. Before ordering, compare your extinguisher's overall height, handle included, with the tub's inside height and its overall width, hose included, with the inside width. Its cylinder diameter has to fit the 6 in tub depth. Allow at least 1 in of clearance each way and check that it fits through the door opening. See our Fire Extinguisher Cabinet Selection Guide for how depth drives fit.

Placement and mounting height follow the NFPA 10 requirements.

Where this model fits

The 1-1/2 in square trim sits between the flat and rolled trims of this tub. The wall gives up 4-5/8 in of depth, against 5-7/8 in for the flat-trim 1035 and 3-1/8 in for the 3 in rolled 1037, and the cabinet still stays inside the ADA's 4 in limit for objects protruding into corridors and other circulation paths (it applies when the leading edge is more than 27 in and no more than 80 in above the finished floor). The handle still has to sit within the applicable ADA reach range, generally no higher than 48 in, so confirm the mounting height and placement with your authority having jurisdiction. If a specification calls for a clear acrylic door, note that JL's clear Panorama door is this 3/16 in polycarbonate. JL's acrylic Panorama doors are the textured, lettered P and Q styles. The same cabinet is built in steel and aluminum, with a flat or rolled trim, with a stainless tub, with a Saf-T-Lok, in #6, #7 or #8 stainless finishes and with a textured acrylic door. For any of those, request a quote from this page.

Documents and downloads

For specification and installation: the manufacturer's Panorama stainless steel submittal (PDF). Need a project-specific submittal filled out? Send us the project details with a quote request.