JL Industries Panorama Stainless Semi-Recessed Frameless Fire Extinguisher Cabinet 20 lb 2038P42

The JL Industries Panorama 2038P42 is a semi-recessed fire extinguisher cabinet for a 20 lb extinguisher, with a frameless door and 304 stainless steel door and trim, made in the USA. The frameless build is what separates the Panorama from every other cabinet line: the glazing runs to the edge of the opening with no surrounding door frame. The 42 glazing is 3/16 in white acrylic with black vertical FIRE EXTINGUISHER lettering, so the cabinet is identified from down the corridor without putting the extinguisher itself on display. The 4-1/2 in rolled trim is the deepest semi-recessed trim in the line, for a wall that can only give up 3-3/8 in of depth. The product images are representative of this configuration; the cabinet ships built as specified in the table below.

Specifications

Model	Panorama 2038P42
Mounting	Semi-recessed, 4-1/2 in rolled trim
Door	Frameless, 3/16 in white acrylic, black vertical lettering (42 glazing)
Material / finish	Door and trim 304 stainless steel, #4 satin; tub steel, white powder coat
Hinge	Continuous stainless steel hinge, opens 180 degrees
Hardware	Zinc plated pull handle with roller catch
Tub interior (W×H×D)	12 in × 27 in × 7-3/4 in
Trim outside (W×H)	15-3/8 in × 30-3/8 in
Wall rough opening (W×H×D)	13 in × 28 in × 3-3/8 in
Fire rating	Non-rated
Wall projection (ADA limit 4 in)	Over 4 in. JL lists the 4-1/2 in trim as not ADA-compliant on projection
Weight	27 lb
Country of Origin	USA

Extinguisher compatibility

JL rates this tub for Cosmic and Galaxy extinguishers up to 20 lb, Mercury from 2.5 to 15 lb, Sentinel from 5 to 10 lb, and the Grenadier, Saturn and Nebula 270 and 272. Check your extinguisher's cylinder diameter and handle height against the 7-3/4 in tub depth before ordering. See our Fire Extinguisher Cabinet Selection Guide for how depth drives fit.

Placement and mounting height follow the NFPA 10 requirements.

Where this model fits

Choose the 4-1/2 in rolled trim when the wall is too shallow for the 2-1/2 in rolled or flat-trim versions of this tub and the cabinet is not in a corridor or means of egress, because the trim projects past the 4 in limit that applies there. Where the 4 in limit does apply, the same tub is made with a 2-1/2 in rolled trim (2037) that stays under it. This is the stainless build; JL builds this door in eleven other colour and lettering combinations, in black or red acrylic and in horizontal or ascending lettering, and the same cabinet in steel and aluminum, with a stainless tub, with a Saf-T-Lok, in #6, #7 or #8 stainless finishes, and with clear polycarbonate glazing. For any of those, request a quote from this page.

Documents and downloads

For specification and installation: the manufacturer's Panorama stainless steel submittal (PDF). Need a project-specific submittal filled out? Send us the project details with a quote request.