JL Industries Panorama Steel Semi-Recessed Frameless Fire Extinguisher Cabinet 10 lb 1017P42

The JL Industries Panorama 1017P42 is a semi-recessed fire extinguisher cabinet with a frameless door, made in the USA. The frameless build is what separates the Panorama from every other cabinet line: the glazing runs to the edge of the opening with no surrounding door frame. The 42 glazing is 3/16 in white acrylic with black vertical FIRE EXTINGUISHER lettering, so the cabinet is identified from down the corridor without putting the extinguisher itself on display.

Specifications

Model	Panorama 1017P42
Mounting	Semi-recessed, 3 in rolled trim
Door	Frameless, 3/16 in white acrylic, black vertical lettering (42 glazing)
Material / finish	Steel, white powder coat
Hinge	Continuous white powder coat hinge, opens 180 degrees
Hardware	Zinc plated pull handle with roller catch
Tub interior (W×H×D)	10-1/2 in × 24 in × 6 in
Trim outside (W×H)	13-7/8 in × 27-3/8 in
Wall rough opening (W×H×D)	11-1/2 in × 25 in × 3-1/8 in
Fire rating	Non-rated
ADA projection	4 in or less, an ADA model
Weight	18 lb
Country of Origin	USA

Extinguisher compatibility

JL rates this tub for Cosmic and Galaxy extinguishers from 2.5 to 10 lb, Mercury from 2.5 to 5 lb, and the 5 lb Sentinel. Check your extinguisher's cylinder diameter and handle height against the 6 in tub depth before ordering. See our Fire Extinguisher Cabinet Selection Guide for how depth drives fit.

Placement and mounting height follow the NFPA 10 requirements.

Where this model fits

Semi-recessed suits a wall too shallow to take a fully recessed tub: the rough opening is only 3-1/8 in deep and the rest of the cabinet sits proud behind a 3 in rolled trim. Even so it stays within the 4 in protrusion limit, so it is usable in a corridor or means of egress. Choose this over the clear-glazed models where you want the cabinet identified but not the extinguisher on view. JL builds this door in eleven other colour and lettering combinations, in black or red acrylic and in horizontal or ascending lettering, and the same cabinet is made in aluminum and 304 stainless, with a flat or square trim, with a Saf-T-Lok, and with clear polycarbonate glazing. For any of those, request a quote from this page.

Documents and downloads

For specification and installation: the manufacturer's Panorama steel submittal (PDF). Need a project-specific submittal filled out? Send us the project details with a quote request.