Need help? Call or text 714-248-6555

Rated 4.9/5 by verified buyers

US Made Supply
/
Type at least 2 characters, then press Enter to see all results.
Roofing & Roofs
Flat or Low Slope
Safety

JL Industries Academy 1026F10 semi-recessed aluminum fire extinguisher cabinet, clear anodized, 1-1/2 in square trim, full-view clear acrylic door

JL Industries Academy Aluminum Semi-Recessed Fire Extinguisher Cabinet 10 lb 1026F10

JL Industries

Authorized Distributor

Fire Extinguisher Cabinet Selection Guide

$245.00

$319.00

-23%

Typically ships in 3-4 weeks.

Volume pricing on 10+ units.

Qualifies for free shipping on orders $3,000+ (contiguous US).

Each

Secure Checkout

We usually reply the same business day

Replacement parts

Doors, tubs, trim, glazing and hardware for installed cabinets. Send the model number for a quote.

See the parts

US Made Products

Flat Rate Shipping

Business Support

American businesses trust US Made Supply because we do the research.

Call 714-248-6555 or email us.

The JL Industries Academy 1026F10 is a semi-recessed aluminum fire extinguisher cabinet for a 10 lb extinguisher, made in the USA. The door and trim are clear satin anodized aluminum over a white steel tub. The tub recesses into the wall while the 1-1/2 in square trim projects from the wall face with a square edge, within the ADA 4 in projection limit. The full-view clear acrylic door has a continuous hinge that opens 180 degrees and a pull handle with roller catch. It is the same cabinet as the 1027F10 with a square trim in place of the 3 in rolled one.

Specifications

Model Academy 1026F10
Also listed as C1026F10 (the model number on JL's cabinet labels and submittals)
Mounting Semi-recessed, 1-1/2 in square trim
Fits extinguisher 2.5 to 10 lb (see compatibility below)
Tub interior (W×H×D) 10-1/2 in × 24 in × 6 in
Trim, outside (W×H) 13-7/8 in × 27-3/8 in
Rough wall opening (W×H×D) 11-1/2 in × 25 in × 4-5/8 in
Material / finish Clear satin anodized aluminum door and trim, steel tub, white
Door Full view, 0.090 in clear acrylic glazing, zinc-plated pull handle, roller catch, 180° continuous hinge
Fire rating Non-rated
Wall projection (ADA limit 4 in) 1-1/2 in trim (4 in or less)
Weight 16 lb
Country of Origin USA

Extinguisher compatibility

JL rates this tub for dry-chemical extinguishers from 2.5 to 10 lb, Halotron clean agent from 2.5 to 5 lb, and a 5 lb CO2 extinguisher. Before ordering, compare your extinguisher's overall height, handle included, with the tub's inside height and its overall width, hose included, with the inside width. Its cylinder diameter has to fit the 6 in tub depth. Allow at least 1 in of clearance each way and check that it fits through the door opening. See our Fire Extinguisher Cabinet Selection Guide for how depth drives fit.

Placement and mounting height follow the NFPA 10 requirements.

Where this model fits

A square trim suits a spec that calls for a flat, square-edged frame, and it is the cabinet to order when a 1026 is already in the wall: this model fits the same 11-1/2 in × 25 in × 4-5/8 in opening. Because the trim projects only 1-1/2 in, more of the cabinet sits in the wall, so the opening is 4-5/8 in deep against 3-1/8 in for the 3 in rolled 1027F10. JL says to confirm the wall rough opening depth before ordering. The same square trim in white steel is the Ambassador 1016V10, and the Academy with a flat trim and a lock is the 1025W10. This model is built to order at the factory. The product images are representative of this configuration; the cabinet ships built as specified in the table above. JL makes it with a vertical-duo door, with a Saf-T-Lok, in dark bronze anodized, and fire-rated; for any of those, request a quote from this page.

Documents and downloads

For specification and installation: the manufacturer's Academy aluminum submittal (PDF), cabinet installation guide (PDF), Academy 3-part specification (Word), Academy Revit model (ZIP), aluminum cabinet health product declaration (PDF), cabinet maintenance guide (PDF). Need a project-specific submittal filled out? Send us the project details with a quote request.

Compare Academy Configurations

JL Industries Academy 1026F10 semi-recessed aluminum fire extinguisher cabinet, clear anodized, 1-1/2 in square trim, full-view clear acrylic door
This item

JL Industries Academy Aluminum Semi-Recessed Fire Extinguisher Cabinet 10 lb 1026F10

$245.00

The JL Industries Academy 1026F10 is a semi-recessed aluminum fire extinguisher cabinet for a 10 lb extinguisher, made in the USA. The door and trim are clear satin anodized aluminum over a white steel tub. The tub recesses into the wall while the 1-1/2 in square trim projects from the wall face with a square edge, within the ADA 4 in projection limit. The full-view clear acrylic door has a continuous hinge that opens 180 degrees and a pull handle with roller catch. It is the same cabinet as the 1027F10 with a square trim in place of the 3 in rolled one.

Specifications

Model Academy 1026F10
Also listed as C1026F10 (the model number on JL's cabinet labels and submittals)
Mounting Semi-recessed, 1-1/2 in square trim
Fits extinguisher 2.5 to 10 lb (see compatibility below)
Tub interior (W×H×D) 10-1/2 in × 24 in × 6 in
Trim, outside (W×H) 13-7/8 in × 27-3/8 in
Rough wall opening (W×H×D) 11-1/2 in × 25 in × 4-5/8 in
Material / finish Clear satin anodized aluminum door and trim, steel tub, white
Door Full view, 0.090 in clear acrylic glazing, zinc-plated pull handle, roller catch, 180° continuous hinge
Fire rating Non-rated
Wall projection (ADA limit 4 in) 1-1/2 in trim (4 in or less)
Weight 16 lb
Country of Origin USA

Extinguisher compatibility

JL rates this tub for dry-chemical extinguishers from 2.5 to 10 lb, Halotron clean agent from 2.5 to 5 lb, and a 5 lb CO2 extinguisher. Before ordering, compare your extinguisher's overall height, handle included, with the tub's inside height and its overall width, hose included, with the inside width. Its cylinder diameter has to fit the 6 in tub depth. Allow at least 1 in of clearance each way and check that it fits through the door opening. See our Fire Extinguisher Cabinet Selection Guide for how depth drives fit.

Placement and mounting height follow the NFPA 10 requirements.

Where this model fits

A square trim suits a spec that calls for a flat, square-edged frame, and it is the cabinet to order when a 1026 is already in the wall: this model fits the same 11-1/2 in × 25 in × 4-5/8 in opening. Because the trim projects only 1-1/2 in, more of the cabinet sits in the wall, so the opening is 4-5/8 in deep against 3-1/8 in for the 3 in rolled 1027F10. JL says to confirm the wall rough opening depth before ordering. The same square trim in white steel is the Ambassador 1016V10, and the Academy with a flat trim and a lock is the 1025W10. This model is built to order at the factory. The product images are representative of this configuration; the cabinet ships built as specified in the table above. JL makes it with a vertical-duo door, with a Saf-T-Lok, in dark bronze anodized, and fire-rated; for any of those, request a quote from this page.

Documents and downloads

For specification and installation: the manufacturer's Academy aluminum submittal (PDF), cabinet installation guide (PDF), Academy 3-part specification (Word), Academy Revit model (ZIP), aluminum cabinet health product declaration (PDF), cabinet maintenance guide (PDF). Need a project-specific submittal filled out? Send us the project details with a quote request.

Frequently Asked Questions

Will a 10 lb fire extinguisher fit this cabinet?

Yes, this cabinet is sized for a 10 lb extinguisher. Fit is governed by the extinguisher's cylinder diameter versus the cabinet's interior depth, so confirm the cylinder dimensions on your extinguisher's cut sheet against the cabinet dimensions listed above.

Is this cabinet fire-rated?

No, this is a standard (non-rated) cabinet, which is fine in a non-fire-rated wall or for surface mounting. To recess a cabinet into a fire-rated wall, choose a fire-rated (FX2) model.

How does this cabinet mount?

It is a semi-recessed cabinet: the tub recesses into the wall while the trim projects a few inches from the wall face, so it works in walls too shallow for a fully-recessed cabinet.

Do I need a key to open this cabinet?

No. This door style ships without a lock. The door is held shut by a roller catch and pulls open by hand, so the annual extinguisher inspection needs no key and no tools. JL does offer a Saf-T-Lok cylinder lock with two keys on other door styles in this series, so ask us for a quote if the site needs a cabinet that locks.

Is it made in the USA?

Yes. JL Industries / Activar manufactures these cabinets in the United States.

More from JL Industries

View all →
A white plastic fire extinguisher cabinet with a transparent front door, showing a tiled interior. A red fire extinguisher graphic with the word 'FIRE' is printed on the side, and a white handle with a small round knob is attached on the right side.

Manufacturer: JL Industries

Cato Chief Plastic Fire Extinguisher Cabinet 10 lb

$47.00

Cato Chief white plastic fire extinguisher cabinet for a 20 lb extinguisher with a clear front panel, red FIRE decal on the side and a tethered break hammer

Manufacturer: JL Industries

Cato Chief Plastic Fire Extinguisher Cabinet 20 lb

$89.00

Cato Chief plastic fire extinguisher cabinets in white and red with FIRE decals and a tethered break hammer

Manufacturer: JL Industries

Cato Chief Plastic Fire Extinguisher Cabinet 5 lb

$42.00

Cato Island Chief MRI safe red plastic fire extinguisher cabinet, front view with the MR marking

Manufacturer: JL Industries

Cato Island Chief MRI Safe Plastic Fire Extinguisher Cabinet 10 lb

$49.00

Cato Island Chief MRI safe red plastic fire extinguisher cabinet for a 5 lb extinguisher, front view with the clear pull panel, warning label and MR marking

Manufacturer: JL Industries

Cato Island Chief MRI Safe Plastic Fire Extinguisher Cabinet 5 lb

$44.00

Cato 220-S surface mount fire alarm pull station cover: clear cover on a red base marked Pull to Open

Manufacturer: JL Industries

Cato Surface Mount Fire Alarm Pull Station Cover Clear 220-S

$36.00

Cato Warrior 95151 red plastic outdoor fire extinguisher cabinet with a clear pull-up cover, warning label and plastic locking seal at the bottom

Manufacturer: JL Industries

Cato Warrior Plastic Outdoor Fire Extinguisher Cabinet 10 lb Red 95151

$44.00

Cato Warrior 95551 red plastic outdoor fire extinguisher cabinet with a clear pull-up cover and warning label

Manufacturer: JL Industries

Cato Warrior Plastic Outdoor Fire Extinguisher Cabinet 5 lb Red 95551

$39.00

US Made Supply

Your Orders

Sign InOrder HistoryOrder Status

Copyright © 2026 US Made, LLC. All Rights Reserved.

All content is for informational purposes only and does not constitute professional, legal, or compliance advice. Verify all requirements with the applicable standards and authorities. Standard names, spec section numbers, and related marks are the property of their respective owners. We cite them to show where a product is usually specified, not as a certification.

Secure Payments

VisaMastercardAmerican ExpressDiscoverApple PayGoogle PayShop PayPayPal